拖链配件

去应力夹、束带板和模块化插入式去应力元件。

从轻便且可通用部署的“超级铝”导槽，到简单且经济实惠的卡入式导槽。

减少意外停机时间，降低维护成本

轻松打开和关闭链节，节省大量的装配时间。

强化现有的波纹管系统。  易于改装，所需的安装空间小，稳定，可防止不必要的侧向移动。 

固定电缆供能。 槽夹，沿导槽引导电缆

• 打开拖链的时间从33秒缩短到2秒（已测试数据集2700.07）
• 适用于E2/000产品系列（2400/2500、2600/2700、3400/3500）
• 长拖链开闭一次完成

• Simply attach with block magnets
• Diameter ø 35mm
• Complete set includes:
  • Moving end OCR.500.1
  • Fixed end OCR.500.2

• Opening of long e-chain sections in one go
• Opening time reduced by a factor of 16 (from 33 to 2 seconds for a 1 m piece)
• Versatile assembly tools for the E2.1 series
• Less force is needed if these tools are used
• Fast Return on Investment

• For hose diameters 4 and 8mm
• High holding force due to "all-round" grip
• The cross section of pneumatic hoses is fully retained
• No crushing of the hoses, and therefore no loss of hose length
• Good price-performance ratio

• For hose diameters 4 and 8mm
• High holding force due to "all-round" grip
• The cross section of pneumatic hoses is fully retained
• No crushing of the hoses, and therefore no loss of hose length
• Good price-performance ratio

Simple one-piece steel support trays for the energy chain's lower run according to your requirements and specifications.

• Noise reducing and low abrasion, safe guidance
• Simple design: easy mounting to all types of profiles and wall brackets
• Lightweight material: available in the colour of your choice
• Available in two types and four versions as a modular system

• The OCR can be mounted at defined distances using the intermediate bracket
• The intermediate bracket allows points of the e-chain® to be attached to metallic surfaces with magnetic clips