The Module Connect is a new kind of plug-in connector for the connection of electric cables, fibre-optic cables and pneumatic hoses. It is characterised by a space-saving, low-profile housing and can be used wherever a large number of cables have to be connected in an installation space as small as possible.
Thanks to the simple modular design, a unique plug-in/disconnect point can be configured as a single module consisting of several different connector housings. Each housing can be fitted with up to four different connector inserts. The housings can then be joined together, making an almost unlimited number of module variations possible in terms of individual widths and height. Due to the low-profile housing design, the Module Connect saves a lot of space and enables a high contact density for every application.
Instead of requiring many plug-in/disconnect points in a limited space, the Module Connect can be configured individually as ONE interface. With the simple modular design, several connector housings are combined to a single module consisting of ONE plug-in/disconnect point.
Module Connect can be adapted to the filling and geometry of your e-chain® and enables ideal cabling in terms of function and design for every application.
1. Select energy chains and cables
2. Configure suitable inserts
3. Determine housing geometry
4. Simply install
The connector modules can be adapted to the filling and geometry of the e-chain® in one or more layers. This enables ideal cabling in terms of function and design for every application.
Combining the system with the universal strain relief system from igus® enables secure attachment directly in the connector housing. The soft elements used enclose the cables and hold them securely in place without damaging them. Visually reminiscent of a honeycomb, the flexible structure adapts itself to different cable diameters which provides universal strain relief.
For the Module Connect, there are a variety of application possibilities, such as at the fixed end or moving end of an e-chain®, between two e-chains® or for routing cables into terminal boxes or switch cabinets.
Mounting bracket for wall and floor installation as well as joint connection
Fibre-reinforced, high-performance polymer. Weight saving compared to conventional rectangular connectors
Various sealing elements adapt to different cable diameters: 3 or 4 cable outlets
Individual housing configurations by combining several assembled connectors: connected in seconds
Strong and easy to handle due to one-piece, screw-on clamping jaw
Up to 4 HARTING Han Modular inserts per housing, e.g. pneumatics, power, BUS, signal: 100 plug inserts to choose from