我的联系人
拖链,chainflex® 高柔性电缆,电缆,定制系统,装配拖链

徐晓苓

+86 21 8036 6608
dry-tech® 轴承技术

冯紫慧

021-80366452

Gears & Gear racks Online-Shop

The gears made of tribologically optimised iglidur® high-performance polymers impress with their significantly higher service life than gears made of comparable plastics.
Due to fine-tuned additives of reinforcement materials and solid lubricants, they do not require additional lubrication.
In the industry's largest test laboratory, the gears made of iglidur® materials are thoroughly tested to continuously improve their service life.

类别
Filter
尺寸

产品数量: 19

新型

iguform S270齿轮,毫米

  • 摩擦系数低
  • 吸湿性低
  • 运动安静

8种不同的模块可选。可选尺寸超过300个。

在此获取匹配的齿轮齿条

要了解有关公差的信息,请参阅产品说明。
从 1.96 USD/Pc.
包含 318 款型号,
2 周内314
至产品页面
新型

iguform S270齿条,毫米

  • 摩擦系数低
  • 吸湿性低
  • 运动安静

可提供用于齿轮产品系列的匹配模块。

您可以在产品说明中找到有关长度的信息。
根据需求确定
包含 8 款型号,
2 周内8
至产品页面
新型

igutek P360齿轮,毫米

  • 耐磨性提高
  • 良好的耐摩擦性能
  • 结构非常坚固
  • 耐冲击负载

8种不同的模块可选。可选尺寸超过300个。

在此获取匹配的齿轮齿条

要了解有关公差的信息,请参阅产品说明。
从 2.26 USD/Pc.
包含 317 款型号,
2 周内315
至产品页面
新型

iguek P360齿条,毫米

  • 耐磨性提高
  • 良好的耐摩擦性能
  • 结构非常坚固
  • 耐冲击负载

可提供用于齿轮产品系列的匹配模块。

您可以在产品说明中找到有关长度的信息。
从 6.01 USD/Pc.
包含 8 款型号,
2 周内8
至产品页面

xirodur® B180,齿轮,毫米

  • ​​​​​​摩擦系数非常低
  • 采用耐磨材料,可实现持续运行
  • 减振
  • 三种轮毂设计可选

在此获取匹配的齿轮齿条
从 9.75 USD/Pc.
包含 9 款型号,
24~48 小时内8
至产品页面

iguform S270 bevel gears - ratio 1:1

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1) can be combined with each other. Please make sure to select the same module.
根据需求确定
包含 8 款型号,
2 周内8
至产品页面

iglidur® F,齿轮,毫米

  • 导电 
  • 高抗压强度
  • 良好的耐温性
  • 有3种轮毂设计
根据需求确定
至产品页面

iglidur® A500齿轮,毫米

  • 适用于食品行业的耐高温耐用材料
  • 符合欧盟  10/2011法规
  • 符合FDA标准
  • 可耐受-100°C至+250°C的温度
根据需求确定
至产品页面

igutek P360 bevel gears - ratio 1:1

  • Increased wear resistance
  • Good tribological specifications
  • Tough
  • Resistant to shock loads

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1) can be combined with each other. Please make sure to select the same module.
根据需求确定
包含 8 款型号,
2 周内8
至产品页面

iguform S270 bevel gears - ratio 1:1,5

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:1.5) can be combined with each other. Please make sure to select the same module.
根据需求确定
包含 2 款型号,
2 周内2
至产品页面

iguform S270 bevel gears - ratio 1:2

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:2) can be combined with each other. Please make sure to select the same module.
根据需求确定
包含 10 款型号,
2 周内10
至产品页面

iguform S270 bevel gears - ratio 1:3

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet


Please note: In order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:3) can be combined with each other. Please make sure to select the same module.
根据需求确定
包含 8 款型号,
2 周内8
至产品页面

iguform S270 bevel gears - ratio 1:4

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:4) can be combined with each other. Please make sure to select the same module.
根据需求确定
包含 6 款型号,
2 周内6
至产品页面

iguform S270 bevel gears - ratio 1:5

  • Low coefficient of friction
  • Low moisture absorption
  • Quiet

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:5) can be combined with each other. Please make sure to select the same module.
根据需求确定
包含 2 款型号,
2 周内2
至产品页面

igutek P360 bevel gears - ratio 1:2

  • Increased wear resistance
  • Good tribological specifications
  • Tough
  • Resistant to shock loads

Please note: in order to achieve the desired transmission ratio, two bevel gears must be ordered.

The bevel gears listed here (1:2) can be combined with each other. Please make sure to select the same module.
根据需求确定
包含 10 款型号,
2 周内10
至产品页面
The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.