Order fast

iglidur® Z

iglidur® Z: The High-Temperature Material

Extremely high compressive strength coupled with high elasticity enables iglidur® Z bearings to attain their prominent features in association with soft shafts, edge loads and impacts. The bearings are at the same time suitable for temperatures up to 250°C.

Personal contact

Ask the product expert

Application examples

Variants

type S (metric sizes)	type F (metric sizes)	type T (metric sizes)	type S (inch sizes)

type F (inch sizes)


Part No. :
Shaft diameter d1 [mm]:
Bearing width b1 [mm]:
Outer diameter d2 [mm]:
d1-Tolerance min. [mm]:
d1-Tolerance max. [mm]:

Housing bore with the tolerance H7, inner diameter of the bearing after installation with F10 tolerance

Chamfer depending on d1

d1 [mm]: Ø 1-6 Ø 6-12 Ø 12-30 Ø > 30

f [mm]: 0,3 0,5 0,8 1,2

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order


Part No. :
Shaft diameter d1 [mm]:
Bearing width b1 [mm]:
Flange thickness b2 [mm]:
Outer diameter d2 [mm]:
Flange diameter d3 [mm]:
d1-Tolerance min. [mm]:
d1-Tolerance max. [mm]:

b1-Tolerance :	h13
b2-Tolerance :	-0,14
d3-Tolerance :	d13

Housing bore with the tolerance H7, inner diameter of the bearing after installation with F10 tolerance

r = max. 0,5 mm

Chamfer depending on d1

d1 [mm]: Ø 1-6 Ø 6-12 Ø 12-30 Ø > 30

f [mm]: 0,3 0,5 0,8 1,2

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order


Part No. :
Shaft diameter d1 [mm]:
Outer diameter d2 [mm]:
s [mm]:
d4 [mm]:
d5 [mm]:
d6 [mm]:
h [mm]:

d1-Tolerance :	+0,25
d2-Tolerance :	-0,25
d4-Tolerance :	+/- 0,2
d5-Tolerance :	+0,375/+0,125
d6-Tolerance :	+ 0,12
h-Tolerance :	+/- 0,2
s-Tolerance :	-0,05

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order


Part No. :
Shaft diameter d1 [inch]:
Bearing width b1 [inch]:
Outer diameter d2 [inch]:
d1 MIN. [inch]:
d1 MAX. [inch]:
housing bore min. [inch]:
housing bore max. [inch]:
shaft dimension min. [inch]:
shaft dimension max. [inch]:

Chamfer depending on d1

d1 [mm]: Ø 1-6 Ø 6-12 Ø 12-30 Ø > 30

f [mm]: 0,3 0,5 0,8 1,2

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order


Part No. :
Shaft diameter d1 [inch]:
Bearing width b1 [inch]:
Flange thickness b2 [inch]:
Outer diameter d2 [inch]:
Flange diameter d3 [inch]:
d1 MIN. [inch]:
d1 MAX. [inch]:
housing bore min. [inch]:
housing bore max. [inch]:
shaft dimension min. [inch]:
shaft dimension max. [inch]:

r = max. 0,5 mm

Chamfer depending on d1

d1 [mm]: Ø 1-6 Ø 6-12 Ø 12-30 Ø > 30

f [mm]: 0,3 0,5 0,8 1,2

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order

When to use iglidur® Z bearings?

For constant temperatures up to 250°C, and for short-term at 310°C
When high wear resistance is required especially under high radial loads
For high surface speeds
For misalignment in association with higher surface pressures

When not to use them?

For low loads and temperatures
iglidur® P
When an economically priced all-rounder is sought
iglidur® G
When electrically conductive bearings are needed
iglidur® F
iglidur® H
iglidur® H370