Order fast

iglidur® G

iglidur® G: The All-Rounder

The widest range of differing requirements are fulfilled by iglidur® G bearings. That's why this material is rightly termed universal. Recommended are applications with medium to high loads, medium surface speeds and moderate temperatures.

Personal contact

Ask the product expert

Application examples

Variants

type S (metric sizes)	type F (metric sizes)	type T (metric sizes)	type S (inch sizes)

type F (inch sizes)	type T (inch sizes)


Part No. :
Shaft diameter d1 [mm]:
Bearing width b1 [mm]:
Outer diameter d2 [mm]:
d1-Tolerance min. [mm]:
d1-Tolerance max. [mm]:

(Dimension according to ISO 3547-1 and special dimensions)
Recommended tolerance for the installation:
- Housing bore H7
- Shaft h9
For b1, tolerance field h13 is applicable .

Chamfer depending on d1

d1 [mm]: Ø 1-6 Ø 6-12 Ø 12-30 Ø > 30

f [mm]: 0,3 0,5 0,8 1,2

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order


Part No. :
Shaft diameter d1 [mm]:
Bearing width b1 [mm]:
Flange thickness b2 [mm]:
Outer diameter d2 [mm]:
Flange diameter d3 [mm]:
d1-Tolerance min. [mm]:
d1-Tolerance max. [mm]:

b1-Tolerance :	h13
b2-Tolerance :	-0,14
d3-Tolerance :	d13

(Dimension according to ISO 3547-1 and special dimensions)
Recommended tolerance for the installation:
- Housing bore H7
- Shaft h9

r = max. 0.5 mm

Chamfer depending on d1

d1 [mm]: Ø 1-6 Ø 6-12 Ø 12-30 Ø > 30

f [mm]: 0,3 0,5 0,8 1,2

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order


Part No. :
Shaft diameter d1 [mm]:
Outer diameter d2 [mm]:
[mm]:
d4 [mm]:
d5 [mm]:
d6 [mm]:
h [mm]:

d1-Tolerance :	+0,25
d2-Tolerance :	-0,25
d4-Tolerance :	+/- 0,2
d5-Tolerance :	+0,375/+0,125
d6-Tolerance :	+ 0,12
h-Tolerance :	+/- 0,2
s-Tolerance :	-0,05

(Dimension according to ISO 3547-1 and special dimensions)
Recommended tolerance for the installation:
- Shaft h9

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order


Part No. :
Shaft diameter d1 [inch]:
Bearing width b1 [inch]:
Outer diameter d2 [inch]:
d1 MIN. [inch]:
d1 MAX. [inch]:
housing bore min. [inch]:
housing bore max. [inch]:
shaft dimension min. [inch]:
shaft dimension max. [inch]:

Chamfer depending on d1

d1 [mm]: Ø 1-6 Ø 6-12 Ø 12-30 Ø > 30

f [mm]: 0,3 0,5 0,8 1,2

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order


Part No. :
Shaft diameter d1 [inch]:
Bearing width b1 [inch]:
Flange thickness b2 [inch]:
Outer diameter d2 [inch]:
Flange diameter d3 [inch]:
d1 MIN. [inch]:
d1 MAX. [inch]:
housing bore min. [inch]:
housing bore max. [inch]:
shaft dimension min. [inch]:
shaft dimension max. [inch]:

r = max. 0,5 mm

Chamfer depending on d1

d1 [mm]: Ø 1-6 Ø 6-12 Ø 12-30 Ø > 30

f [mm]: 0,3 0,5 0,8 1,2

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order


Part No. :
Shaft diameter d1 [inch]:
Outer diameter d2 [inch]:
s [inch]:
d4 [inch]:
d5 [inch]:
d6 [inch]:
h [inch]:

d1-Tolerance :	+ .010
d2-Tolerance :	- .010
d4-Tolerance :	+/- .005
d5-Tolerance :	.015/+.005
d6-Tolerance :	+ .005
h-Tolerance :	+ .008
s-Tolerance :	- .0020

With the selected part you'll arrive at:

PDF file Life time calculation 3D-CAD Samples and catalog order

When to use iglidur® G bearings?

When I need an economical all-round bearing
For extremely high loads
For low to medium surface speeds
When the bearing should suit different shafts
For simple pivoting and rotating movements
When the bearing should perform extremely multi-sided functions
When dry operation is required
When the bearing should be insensitive to dirt
For strong vibrations

When not to use them?

When machining of the wall area is required
iglidur® M250
When extremely high wear resistance is required in continuous operation
iglidur® W300
When constant temperatures of more than 130°C are present
iglidur® H
iglidur® X
iglidur® H370
For underwater application
iglidur® H